Facebook

Instagram

New Header 4
 

 

Additional Options
 

All Sumax Products & Services are Proudly made in the USA

Watch the Sumax Baggster w/ DVS Video

 

Watch the
Sumax Softail Bagger
w/ DVS Video

 

Watch the Sumax Softail Rubbermount Chopper w/ DVS Video

 

Watch the Sumax Engravers Revenge w/ DVS Video

 

Top of pg video

Watch the Sumax Street
Sweeper w/ DVS Video

Create your own Softail Bagger

Softail Bagger pic

8761 fxst brkts Softail

 

Sumax stainless steel high gloss black powdercoated
saddle bag brackets


For all year Softails accept H.D. Saddle bags 1993 and newer. Our 1/4 turn dzus
receptacles accept dzus fasteners. If you do not have dzus fasteners see DZUS fastener kit
below. For additional horizontal support, our Part # 8810A is included at no charge.

$419.00

Part # 8761A Click Here to Order


Turn Signals located on fender or rails must be relocated for bag clearance. Distance from fender rail bolts to bottom of bag, 13.5" needed for clearance. Deluxe models need not to relocate. Wide seats may hinder opening of lid. If your exhausts are at the axle or below, you should have clearance. If your bike is lowered where the rear axle/nut is above the system, axle/nut you may contact & damage your bag. If you have rear crash bars on your Softail, our brackets will not work. Our brackets will work with detachable or solid mount sissy bars and luggage racks. Our mounting systems will work with HD passenger boards. Slim model's fender rails are too short. You must add the standard Softail fender rail cover to work on the Slim model. Breakout model will require special fabrication of mounting system on your end and a widened rear fender. Call us for details.

Create your own Dyna Bagger

SUMAX’S extensive range of hard bag options has now expanded with the introduction of bags and associated brackets for use on all H-D Dyna models. The brackets are powdercoated black by Sumax and feature 1/4-turn quick disconnects with Dzus fasteners like those found on all H-D Touring models. These connectors allow the brackets to be used with either Sumax hard bags or H-D hard or soft bags from 1993 and newer. Distance from fender rail bolts to bottom of the bag is 13.5" needed for clearance. Our mounting system will work with the Switchback model. Among the options offered are extended and wide versions and pre-installed plug-in LED lighting featuring "Run, Stop and Turn" functions. The reason we put the saddle bags just to the rear of the shocks is for passenger comfort. If the bags were more forward the passengers legs would hit the bags trying to find the pegs.

** For Models w/ rear strut mounted turn signals, you must relocate turn signals. **

Solid Mount Sissy Bars, Back Rests, Luggage Racks etc. will work with our Brackets.

Mounting Dyna Brackets with "Detachables"

Click to see installing Dyna Saddle Bag Brackets onto your fender rails while still using your detachable mounts.

Detachables PDF

Detachables PDF

Part 1

Detachables Video Part 1

Part 2

Detachables Video Part 2

8814

Part # 8817

For Pre 2006 Dyna Models

These brackets will allow you to run any Harley (1993 & newer) hard bags or soft bags. Brackets are finished in Sumax High Gloss Black powder coat. Our 1 Piece Design makes installation easy, brackets include all mounting hardware and DZUS receptacles which accept 1/4 turn fastners just like the stock Harley Touring models. For additional horizontal support, our Part # 8810A is included at no charge.

$419.00 + Shipping
Click Here to Order

Brackets designed to be used with detachables (sissy bar, back rest, luggage rack etc.)

Part # 8817D
$419.00 + Shipping
Click Here to Order

Dyna wBrackets

Mounting Brackets shown with H-D Bags

Part # 8814

For 2006 & 2007 Dyna Models

These brackets will allow you to run any Harley (1993 & newer) hard bags or soft bags. Brackets are finished in Sumax High Gloss Black powder coat. Our 1 Piece Design makes installation easy, brackets include all mounting hardware and DZUS receptacles which accept 1/4 turn fastners just like the stock Harley Touring models. For additional horizontal support, our Part # 8810A is included at no charge.

$419.00 + Shipping
Click Here to Order

Brackets designed to be used with detachables (sissy bar, back rest, luggage rack etc.)

Part # 8814D
$419.00 + Shipping
Click Here to Order

Part # 8815

For 2008 & Up Dyna Models


These brackets will allow you to run any Harley (1993 & newer) hard bags or soft bags. Brackets are finished in Sumax High Gloss Black powder coat. Our 1 Piece Design makes installation easy, brackets include all mounting hardware and DZUS receptacles which accept 1/4 turn fastners just like the stock Harley Touring models. For additional horizontal support, our Part # 8810A is included at no charge.

$419.00 + Shipping
Click Here to Order

Brackets designed to be used with detachables (sissy bar, back rest, luggage rack etc.)

Part # 8815D
$419.00 + Shipping
Click Here to Order

 

Dyna wHD Bags

Mounting Brackets shown with H-D Bags

 

Create your own Sportster Bagger

SUMAX’S extensive range of hard bag options has now expanded with the introduction of bags and associated brackets for use on 2000 and Up Sportster models. The brackets are powder coated black by Sumax and feature 1/4-turn quick disconnects with Dzus fasteners like those found on all H-D Touring models. These connectors allow the brackets to be used with H-D hard or soft bags from 1993 and newer.

Note: You will have to relocate factory turn signals on all models. Nightster® model will have to relocate side mount license plate.

Solid Mount Sissy Bars and Luggage Racks will work with our Brackets.

Part # 8812
XL Models
These brackets will allow you to run any Harley (1993 & newer) hard bags or soft bags. Brackets are finished in Sumax High Gloss Black powder coat. Our 1 Piece Design makes installation easy, brackets include all mounting hardware and DZUS receptacles which accept 1/4 turn fastners just like the stock Harley Touring models.For additional horizontal support, our Part # 8810A is included at no charge.

$419.00 + Shipping
Click Here to Order

8812 nick3

# 8812 Shown here with stock HD Bags

8812 Sportster

Create Your Own FXR Bagger

SUMAX’S extensive range of hard bag options has now expanded with the introduction of bags and associated brackets for use on all year FXR models. The brackets are powder coated black by Sumax and feature 1/4-turn quick disconnects with Dzus fasteners like those found on all H-D Touring models. These connectors allow the brackets to be used with either H-D hard or soft bags.

Fits 1991 and newer models due to shock location.

Fender Rail Hole to Shock bolt Measures 11 5/8".
Please double check your Measurement.

Solid Mount Sissy Bars and Luggage Racks will work with our Brackets.

Part # 8818
Fits 1991 and newer models due to shock location.
Fender Rail Hole to Shock bolt Measures 11 5/8".
Please double check your Measurement.

These brackets will allow you to run any Harley (1993 & Up) hard bags or soft bags. Brackets are finished in Sumax High Gloss Black powder coat. Our 1 Piece Design makes installation easy, brackets include all mounting hardware and DZUS receptacles which accept 1/4 turn fastners just like the stock Harley Touring models.

$419.00 + Shipping Click Here to Order

Phantom Brkts 021

Saddle Bag Mounting Bracket Cross Brace Support

Our Sumax Cross Brace is made to work with our Sumax Saddle Bag Brackets, and is designed to reduce vibrations and add more rigidity. They are made from 3/16" Laser Cut Steel, Powdercoated in High Gloss Sumax Black & adjustable to work with all of our Saddle Bag Brackets.

$99.99

Part # 8810A Click Here to Order

8810 w8758 bracket

Part #8810 shown w/8758 Brackets

Part # 8810

New Support Bracket braces saddle bag support
brackets side to side. These 100% made in the
USA cold rolled steel brackets are finished in a
rich high gloss black Sumax powdercoat. Use in
combination with our Part # 8758 Phantom
Brackets as pictured above. Comes complete with
stainless steel hardware.


$99.00 Click Here to Order

 

8758 Phamtom Brackets

Part # 8758

Fits 1993-08 Road King, Road Glide, Electra
Glide & Street Glide Models, Phantom brackets
give floating effect of saddle bags, by eliminating
the rear crash bar in front of your bags. Gives your
bike the clean look of the new touring models.
These 100% made in the USA stainless steel brackets have slotted holes to mount and keep your
bags nice and level, unlike stock or other
aftermarket brackets. Comes complete with
stainless hardware and rubber bumpers.


$189.00 Click Here to Order

 

   

 

 
Sumax Red logo
122 Clear Road, Oriskany, NY 13424 USA
Phone: 315.768.1058 • Fax: 315.768.1046